Alkycontrol Methanol Injection C5 Corvette

Alkycontrol Methanol Injection kit for the C5 Corvette platform. This is the best kit on the market for the C5. Plenty of reading and feedback at www.corvetteforum.com. Features Custom made hoses, fittings, wiring, instructions etc.Modified Pump 250+ PSI on M15 and water with cover to prevent any water from intruding into pumpProgressive controller preset for the C5 LS based platform.Custom Relay to transfer power from Fuse box to controller eliminating any interference from teh system and vehicle electronics.GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions.3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal. This is a complete kit. Down to the custom tank fitting and grommet for the reservoir, cap for reservoir, plug for ww pump, stainless steel hardware to mount pump, vehicle specific instructions, etc.Pre-taped pump fittings 90 micron in-line filter M15 15 GPH Nozzle with checkvalve. All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.Not to be confused with a generic kit. Will not fit any other application without major modifications. If you need a vehicle specific kit, please contact us. Instructions, tip sheets, and tech support is included. 1000's of this kit have been sold. Will support 650 RWHP on a single. Twin nozzle upgrades available to increase delivery and support over 1k RWHP has been made on pump gas 93 and this kit running straight methanol with an LS based motor. Any questions.. please feel free to ask.